If you own an AMD RX 570 graphics card 4GB or 8GB, you may have encountered an error message that reads “Default Radeon WattMan settings has been restored due to unexpected system failure.” This error message usually indicates that there is a problem with your graphics card’s overclocking settings, and it has been reset to default settings to prevent any damage to the hardware. In this article, we’ll explore why this error occurs and provide detailed steps on how to fix it.
Why Does “Default Radeon WattMan Settings Has Been Restored” Error Occur?
The “Default Radeon WattMan settings has been restored” error message typically occurs when the graphics card is overclocked beyond its limits or when it encounters an unstable overclocking configuration. Overclocking is the process of increasing the clock speed of a graphics card to boost its performance, but it can also increase its power consumption and heat output, which can cause instability and crashes. To prevent any damage to the graphics card, the AMD Radeon software automatically resets the overclocking settings to their default values.
How to Fix “Default Radeon WattMan Settings Has Been Restored” Error?
If you encounter the “Default Radeon WattMan settings has been restored” error message, you can fix it by following these steps:
Step 1: Open AMD Radeon Settings
Right-click on your desktop and select “AMD Radeon Settings” from the context menu.
Step 2: Go to Global WattMan Settings
In the AMD Radeon software, click on the “Gaming” tab, and then click on “Global Settings.”
Step 3: Disable Automatic Undervolting
Under the “Global WattMan” tab, scroll down to “Advanced Control” and disable “Automatic Undervolting.” This option automatically reduces the voltage of the graphics card to save power, but it can also cause instability and crashes.
Step 4: Reduce GPU Clock Speed
Under the “Global WattMan” tab, reduce the “GPU Clock Speed” by a small amount, such as 50MHz, and click on “Apply” to save the changes. You can also reduce the “Memory Clock Speed” by a small amount, such as 100MHz, if necessary.
Step 5: Test Stability
Click on “Test” to check the stability of the new settings. If the system does not crash, increase the clock speeds in small increments and repeat the testing process until you find the optimal overclocking settings that provide stable performance.
Conclusion
The “Default Radeon WattMan settings has been restored” error message on the AMD RX 570 graphics card is a common issue that can occur when the graphics card is overclocked beyond its limits or when it encounters an unstable overclocking configuration. By following the steps outlined in this article, you can fix this error and optimize your graphics card’s performance without risking any damage to the hardware.
About the Author
